MikroTik wAP ac LTE kit LTE Outdoor Router (RBwAPGR-5HacD2HnD&R11e-LTE)
MikroTik RBwAPGR5HacD2HnD&R11e-LTE Outdoor Access Point
Overview:
With its IP54-rated enclosure and integrated LTE Cat4 modem, the RBwAPGR5HacD2HnD&R11e-LTE (wAP ac LTE kit) is a dual-band outdoor access point built for WISP field installations and branch or office deployments that require LTE failover alongside a wired broadband link.
Description:
At the core of the device is a quad-core ARM 32bit IPQ-4018 chipset running at 716 MHz, paired with 128 MB RAM and 16 MB flash storage and shipped with RouterOS license level 4. The fanless passive cooling design removes moving parts, while the IP54-rated housing is intended for wall, ceiling or pole mounting within a tested ambient temperature range of -30°C to +50°C.
On the wireless side, two dual-chain radios operate concurrently: the 2.4 GHz band delivers up to 300 Mbit/s on 802.11b/g/n, and the 5 GHz band delivers up to 867 Mbit/s on 802.11a/n/ac (Wi-Fi 5). Both bands use 2.5 dBi antennas, so latency-sensitive traffic can be separated onto 5 GHz while 2.4 GHz serves dense client populations. Two 10/100/1000 Gigabit Ethernet ports allow the unit to operate as a wired router or bridge at Gigabit line rate.
The integrated R11e-LTE modem provides LTE Cat4 connectivity at 150 Mbps downlink and 50 Mbps uplink across FDD bands 1, 2, 3, 7, 8 and 20 plus TDD bands 38 and 40, with fallback to 3G R7 and 2G Class12. A Micro SIM slot and an available MiniPCI-e slot are provided, and the unit can be powered either through 802.3af/at PoE-IN (18-57 V) or a 10-57 V DC jack, with maximum power consumption of 14 W. This combination lets RouterOS handle LTE-backed routing, VPN termination and traffic policy on a single outdoor-rated platform without additional LTE hardware at the site.
Key Highlights:
- Quad-core ARM IPQ-4018 CPU at 716 MHz with 128 MB RAM and 16 MB flash storage
- Concurrent dual-band radios: 300 Mbit/s on 2.4 GHz (Wi-Fi 4) and 867 Mbit/s on 5 GHz (Wi-Fi 5)
- Integrated LTE Cat4 modem (150 Mbps downlink / 50 Mbps uplink) with FDD 1/2/3/7/8/20 and TDD 38/40 bands
- Two 10/100/1000 Gigabit Ethernet ports for wired routing or bridging
- Micro SIM slot and one MiniPCI-e expansion slot
- IP54 outdoor housing, passive cooling and 802.3af/at PoE-IN support
Technical Specifications:
| Parameter | Value |
|---|---|
| Manufacturer | MikroTik |
| Model | RBwAPGR5HacD2HnD&R11e-LTE |
| Manufacturer Product Code | RBwAPGR-5HacD2HnD&R11e-LTE (wAP ac LTE kit) |
| Product Category | Outdoor Access Point |
| Architecture | ARM 32bit |
| CPU | IPQ-4018, 4 cores / 4 threads, 716 MHz |
| Switch Chip Model | IPQ-4018 |
| RAM | 128 MB |
| Storage | 16 MB FLASH |
| Operating System | RouterOS (license level 4) |
| Wireless 2.4 GHz | 802.11b/g/n, 2 chains, 300 Mbit/s, 2.5 dBi (Wi-Fi 4) |
| Wireless 5 GHz | 802.11a/n/ac, 2 chains, 867 Mbit/s, 2.5 dBi (Wi-Fi 5) |
| Ethernet Ports | 2x 10/100/1000 |
| LTE Category | Cat4 (150 Mbps downlink / 50 Mbps uplink) |
| LTE FDD Bands | 1 (2100 MHz), 2 (1900 MHz), 3 (1800 MHz), 7 (2600 MHz), 8 (900 MHz), 20 (800 MHz) |
| LTE TDD Bands | 38 (2600 MHz), 40 (2300 MHz) |
| 3G | R7 (21 Mbps downlink / 5.76 Mbps uplink), bands 1/2/5/8 |
| 2G | Class12, bands 2/3/5/8 |
| TAC | 35565409 |
| SIM Slots | 1x Micro SIM |
| MiniPCI-e Slots | 1 |
| PoE In | 802.3af/at, 18-57 V |
| DC Input | 10-57 V (DC jack) |
| Number of DC Inputs | 2 (DC jack, PoE-IN) |
| Max Power Consumption | 14 W |
| Max Power Consumption without Attachments | 10 W |
| Cooling Type | Passive |
| Tested Ambient Temperature | -30°C to +50°C |
| MTBF | Approximately 100,000 hours at 25°C |
| IP Rating | IP54 |
| Monitoring | PCB temperature and voltage monitor |
| Certifications | CE, FCC, IC, EAC, ROHS |


