MikroTik wAP ac LTE kit LTE Outdoor Router (wAPGR-5HacD2HnD&EC200A-EU)
MikroTik wAPGR-5HacD2HnD&EC200A-EU Outdoor LTE Access Point
Overview:
The MikroTik wAP ac LTE kit is a compact outdoor access point that combines a dual-band Wi-Fi 5 radio with an integrated Cat4 LTE modem inside a single IP54 weatherproof enclosure. It is built for field deployments where no wired ISP exists, or where a wired uplink must be backed up by cellular — a natural fit for WISPs, SMB branches and remote sites.
Description:
At the core of the device sits an ARM 32bit architecture built on the IPQ-4018 SoC. The 4-core, 4-thread CPU scales automatically between 488 and 896 MHz and runs RouterOS v7 (license level 4) with 128 MB of RAM and 16 MB of FLASH storage. The same IPQ-4018 chip serves both the switch and the 2.4 GHz / 5 GHz wireless layers, which keeps the unit compact, passively cooled and power-efficient.
The wireless side is dual-band with a 2x2 chain configuration: 802.11b/g/n (Wi-Fi 4) at up to 300 Mbit/s on 2.4 GHz and 802.11a/n/ac (Wi-Fi 5) at up to 867 Mbit/s on 5 GHz, both fed by internal antennas with 2.5 dBi gain. Two 10/100/1000 Gigabit Ethernet ports are provided, allowing the integrated LTE modem to act as a mobile internet backup alongside an existing wired ISP link. The Cat4 modem delivers 150 Mbit/s downlink and 50 Mbit/s uplink and covers LTE FDD bands 1, 3, 5, 7, 8, 20 and 28 plus TDD bands 38, 40 and 41n; the addition of band 28 (700 MHz) extends reach in rural and long-distance scenarios.
The enclosure is rated IP54 and tested for ambient temperatures from -30°C to 60°C. Mounting is done from the inside of the case against any external wall, and the bottom section can be secured with an optional anti-vandal screw that only the owner can open. An opening in the back of the case lets the Ethernet cable run directly behind the unit and through the wall, keeping the installation discreet. Power flexibility comes from two DC inputs: a DC jack accepting 10-57 V and a PoE-IN port accepting 18-57 V with 802.3af/at support, at a maximum consumption of 12 W. RFC2544-based testing reports 1973.4 Mbit/s in fast-path bridging and routing with 1518-byte packets, and 424.5 Mbit/s for a single IPsec tunnel using AES-128-CBC + SHA1 with 1400-byte packets.
Key Highlights:
- Quad-core IPQ-4018 ARM 32bit CPU with 128 MB RAM and RouterOS v7 (license 4)
- Dual-band 2x2 wireless: 300 Mbit/s on 2.4 GHz (Wi-Fi 4) and 867 Mbit/s on 5 GHz (Wi-Fi 5)
- Two 10/100/1000 Gigabit Ethernet ports
- Integrated Cat4 LTE modem (150 Mbit/s down / 50 Mbit/s up) with wide FDD/TDD band coverage including B28
- IP54 weatherproof enclosure, -30°C to 60°C operating range, passive cooling
- Dual power inputs (802.3af/at PoE-IN and 10-57 V DC jack) with 12 W maximum consumption
Technical Specifications:
| Parameter | Value |
|---|---|
| Manufacturer | MikroTik |
| Model | wAPGR-5HacD2HnD&EC200A-EU |
| Product Group | Outdoor Access Point |
| Architecture | ARM 32bit |
| CPU | IPQ-4018 |
| CPU Core Count | 4 |
| CPU Threads | 4 |
| CPU Nominal Frequency | 488-896 (auto) MHz |
| Switch Chip Model | IPQ-4018 |
| Operating System | RouterOS v7 |
| RouterOS License | 4 |
| RAM | 128 MB |
| Storage | 16 MB FLASH |
| MTBF | Approximately 200,000 hours at 25°C |
| Tested Ambient Temperature | -30°C to 60°C |
| Ethernet Ports | 2x 10/100/1000 Gigabit |
| 2.4 GHz Max Data Rate | 300 Mbit/s |
| 2.4 GHz Chains | 2 |
| 2.4 GHz Standards | 802.11b/g/n (Wi-Fi 4) |
| 2.4 GHz Antenna Gain | 2.5 dBi |
| 5 GHz Max Data Rate | 867 Mbit/s |
| 5 GHz Chains | 2 |
| 5 GHz Standards | 802.11a/n/ac (Wi-Fi 5) |
| 5 GHz Antenna Gain | 2.5 dBi |
| LTE Category | Cat4 (150 Mbit/s downlink, 50 Mbit/s uplink) |
| LTE FDD Bands | 1, 3, 5, 7, 8, 20, 28 |
| LTE TDD Bands | 38, 40, 41n |
| 3G Category | R7 (21 Mbit/s downlink, 5.76 Mbit/s uplink) |
| 3G Bands | 1, 5, 8 |
| 2G Category | Class 12 |
| 2G Bands | 3 (1800 MHz), 8 (900 MHz) |
| SIM Slots | 1 (Micro SIM) |
| MiniPCI-e Slots | 1 |
| Number of DC Inputs | 2 (DC jack, PoE-IN) |
| DC Jack Input Voltage | 10-57 V |
| PoE In | 802.3af/at |
| PoE In Input Voltage | 18-57 V |
| Max Power Consumption | 12 W |
| Cooling Type | Passive |
| IP Rating | IP54 |
| Certification | CE, E-MARK, EAC, ROHS |
| PCB Temperature Monitor | Supported |
| Voltage Monitor | Supported |
| TAC | 86314105 |


